Dacor DHD48MW Use and Care Manual - Page 18

Removing the filters, Model Shown: DHD48

Page 18 highlights

Care and maintenance Removing the filters The filters are under the hood toward the rear. These external components lie directly above all heat, steam, and particulates that are drawn upward into the blower(s). A B REAR BOTTOM 1. Tension clips at the front of the hood hold the filters in place. 2. You can easily access the main power switch when the filter beneath it is removed. 3. In performing this procedure, take care not to bump the switch or scratch the grease channel along the hood's bottom-rear edge. 4. If you cannot reach the filters from the floor, Dacor recommends you use a stepstool or similar sturdy device to help you reach up into the hood. C D Model Shown: DHD48 A. Main power switch B. Tension clip C. Filter knob D. Filter Care and maintenance 18 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

English
18
Care and maintenance±
Care and maintenance±
Removing the filters
The filters are under the hood toward the rear. These external components lie directly
above all heat, steam, and particulates that are drawn upward into the blower(s).
A
B
C
D
Model Shown: DHD48
REAR
BOTTOM
A.
Main power switch
B.
Tension clip
C.
Filter knob
D.
Filter
1.
Tension clips at the front of the hood
hold the filters in place.
2.
You can easily access the main power
switch when the filter beneath it is
removed.
3.
In performing this procedure, take
care not to bump the switch or scratch
the grease channel along the hood’s
bottom-rear edge.
4.
If you cannot reach the filters from
the floor, Dacor recommends you use
a stepstool or similar sturdy device to
help you reach up into the hood.