Dacor ER30G Planning Guides - Page 1

Document # PG05-001 ER30G, ER30GI 30" Wide, Epicure® All Gas Range Revised 05/25/10 Page 1/3 PLANNING GUIDE Electrical Circuit Required Total Connected Load 120 Vac, 60 Hz, 15 Amps., dedicated, grounded 4.0 Amps. @ 120 Vac, 60 Hz Electrical Requirements warning • Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information. • This appliance must be installed in accordance with the accompanying installation instructions. All tolerances ±1/16" (±1.6mm) unless otherwise noted. 45 9/16" (1157mm) 28 9/16" (725mm) 27 1/16" (687mm) 26 1/8" (664mm) 24" (610mm) 1 1/8" (29mm) Front of open door Front of handle Front edge of bullnose Front panel Rear of front panel Backguard thickness NOTE: Neither model is compatible with a raised vent. 1 9/16" (40mm) Product width: 29 7/8" (759mm) 9" (229mm) Grates extend Backguard*** 1" above trim 6" (152mm) 3" (76mm) Backguard* Backguard*** ER30GI: 2" (51mm) Partial stainless steel side panel 3" (76mm) ER30G: Full stainless steel side panels 35" (889mm) to 37 1/8" (943mm) 1 3/4" (44mm) Backguard** * Standard on model ER30G Optional on model ER30GI, NOT compatible with self-rimming installations ** Standard on model ER30GI Optional on model ER30G *** Optional on both models, NOT compatible with self-rimming installations ER30G is designed for freestanding installations. ER30GI is designed for installation in a recessed cabinet or island. ER30G is NOT equipped for self-rimming installation. ER30G/ER30GI Overall Depth Dimensions - side view Specifications subject to change without notice. Install all appliances according to accompanying installation instructions. www.Dacor.com Phone: (800) 793-0093 5.1