Dacor ER30G Planning Guides - Page 2

Wide, Epicure, All Gas Range - er30gi

Get Dacor ER30G PDF manuals and user guides View all Dacor ER30G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

Document # PG05-001 B 13" (330mm) Max.4 18" (457mm) Min.1, 4 Non-combustible surface along back wall recommended 30" (762mm) Min.1 A ER30G, ER30GI 30" Wide, Epicure® All Gas Range Revised 05/25/10 Page 2/3 PLANNING GUIDE All tolerances +1/16" -0 (+1.6mm, 0) unless otherwise noted. A* B C 30 1/16" (764mm) 30" (762mm) Minimum 36" (914mm) Recommended 37 1/8" (943mm) Maximum * See the cutout dimensions below for self-rimming installations NOTE: Self-rimming kit is included with model ER30GI. The self-rimming kit allows the trim to overlap the counter top on the sides and back. Top of finished counter 10" (254mm Min. to combustible side walls above the range (both sides) Note 2 C Suggested location of utilities3 1 Vertical to combustible surface from range grate level 2 Cabinet/countertop depth is at discretion of customer but cabinet face SHALL NOT protrude further than rear of front panel. See product dimesions. 3 Consult local code for exact location requirements. 4 Not applicable for cabinets more than a horizontal distance of 10" (254mm) from the edge of the range. Slide-In Cutout dimensions 10" Min. (254mm) to any combustibles above counter both sides non comubustible rear wall recommended 10" Min. (254mm) to any combustibles above counter both sides rear wall or countertop edge 3/4" Min. (19mm) Countertop overhang 29 1/4" (743mm) countertop opening 30" (762mm) cabinet opening below countertop Cabinet face below countertop Notch countertop overhang to width of cabinets Countertop Height: Min: 34 3/4" (883mm) Max: 36 7/8" (937mm) Countertop Thickness: Max: 1 5/8" (41mm) 24" (610mm) Countertop overhang 2 1/8" (54mm) Max. 29 1/4" (743mm) countertop opening 30" (762mm) cabinet opening below countertop Cabinet face below countertop Notch countertop overhang to width of cabinets Countertop Height: Min: 34 3/4" (883mm) Max: 36 7/8" (937mm) Countertop Thickness: Max: 1 5/8" (41mm) 24 1/8" (613mm) Countertop overhang 2 1/8" (54mm) Max. Self-Rimming Cutout Dimensions Cabinet Depth Exactly 24 Inches (ER30GI ONLY) Self-Rimming Cutout Dimensions Cabinet Depth Greater Than 24 Inches (ER30GI ONLY) Specifications subject to change without notice. Install all appliances according to accompanying installation instructions. www.Dacor.com Phone: (800) 793-0093 5.2

  • 1
  • 2
  • 3
PLANNING
GUIDE
www.Dacor.com
Phone: (800) 793-0093
Specifications subject to change without notice.
Install all appliances according to accompanying installation instructions.
5.2
ER30G, ER30GI
All tolerances +1/16” -0 (+1.6mm, 0) unless otherwise noted.
A*
B
C
30 1/16” (764mm)
30” (762mm) Minimum
36” (914mm) Recommended
37 1/8” (943mm)
Maximum
Note 2
2
Cabinet/countertop depth is at discretion of customer
but cabinet face SHALL NOT protrude further than rear
of front panel. See product dimesions.
3
Consult local code for exact location requirements.
4
Not applicable for cabinets more than a horizontal
distance of 10” (254mm) from the edge of the range.
1
Vertical to combustible surface from range grate level
B
A
Non-combustible
surface along
back wall
recommended
10” (254mm Min.
to combustible side
walls above the range
(both sides)
Top of
finished
counter
Suggested
location of
utilities
3
30” (762mm)
Min.
1
13” (330mm)
Max.
4
18” (457mm)
Min.
1, 4
C
SLIDE-IN CUTOUT DIMENSIONS
SELF-RIMMING CUTOUT DIMENSIONS -
CABINET DEPTH GREATER THAN 24 INCHES
(ER30GI ONLY)
SELF-RIMMING CUTOUT DIMENSIONS -
CABINET DEPTH EXACTLY 24 INCHES
(ER30GI ONLY)
non comubustible
rear wall recommended
Countertop Height: Min: 34 3/4” (883mm)
Max: 36 7/8” (937mm)
Countertop Thickness: Max: 1 5/8” (41mm)
countertop opening
29 1/4” (743mm)
30” (762mm)
cabinet opening
below countertop
below countertop
Cabinet face
Notch countertop
overhang to width of
cabinets
10” Min. (254mm)
to any combustibles
above counter both sides
Countertop overhang
2 1/8” (54mm) Max.
24”
(610mm)
rear wall or
countertop edge
Countertop Height: Min: 34 3/4” (883mm)
Max: 36 7/8” (937mm)
Countertop Thickness: Max: 1 5/8” (41mm)
countertop opening
29 1/4” (743mm)
30” (762mm)
cabinet opening
below countertop
below countertop
Cabinet face
Notch countertop
overhang to width of
cabinets
3/4” Min. (19mm)
Countertop overhang
10” Min. (254mm)
to any combustibles
above counter both sides
Countertop overhang
2 1/8” (54mm) Max.
24 1/8”
(613mm)
* See the cutout dimensions below for self-rimming installations
Document # PG05-001
Revised 05/25/10
Page 2/3
NOTE: Self-rimming kit is included with model ER30GI.
The self-rimming kit allows the trim to overlap the
counter top on the sides and back.
30” Wide, Epicure
®
All Gas Range