Dacor ETT365-2 Planning Guides - Page 1

Document # PG03-002 ETT304-1 and ETT365-2 30 Inch and 36 Inch Wide, Renaissance® Electric Cooktops Revised 10/01/11 Page 1/3 PLANNING GUIDE Product tolerances: ±1/16" (±1.6 mm) unless otherwise noted 30 1/4" * (76.8 cm) 4" (10.2 cm) Chassis height warning • Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information. • This appliance must be installed in accordance with the accompanying installation instructions. 21 1/4" * (54.0 cm) 19 3/8" (49.5 cm) 28 3/8" (72.1 cm) product dimensions - ETT304-1 36 1/4" * (92.1 cm) 19 3/8" 21 1/4" * (49.5 cm) (54.0 cm) 4" (10.2 cm) Chassis height 34 3/8" (87.3 cm) Product dimensions - ETT365-2 * For units with stainless steel trim, other units may be up to 1/8" less. Model No. Electrical Circuit Required Total Connected Load* Minimum Supply Wire Size Line and Ground Connections ETT304-1 ETT365-2 240 Vac, 60 Hz, 40 Amps. 240 Vac, 60 Hz, 40 Amps. 6.9 kW (29 Amps.) 9.1 kW (38 Amps.) No. 8 AWG * For reference only, See the product data label on bottom of unit for exact specifications. Electrical Supply Requirements NOTES: 1. The cooktop is supplied with a flexible, 48 inch long power conduit consisting of two (2) insulated hot lead conductors (L1 and L2) and one (1) insulated ground conductor. There is no neutral connection. All leads are copper. The conduit is connected to the right corner of the cooktop. Do not connect the ground wire to neutral. 2. Tested in accordance with the latest edition of ANSI Z21.1 and U.L. 858 Standard for household cooking appliances. 3. These cooktops are not approved for recessed installation. Specifications subject to change without notice. www.dacor.com Phone: (800) 7933-0.4093