Dacor HDPR36 User Manual - Dual-fuel Range - Page 22
Before Cooking, Positioning the Oven Racks, About the Control-Panel Beep
View all Dacor HDPR36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Operating the Oven About the Control-Panel "Beep" The control panel beeps: 1) when you tap a key, 2) when a timer reaches zero, 3) when there is an error, and 4) when the oven performs certain set functions. You can silence/activate this tone as desired. 1. On the control panel, tap-hold START TIME for 6 seconds. "Beep" appears on the display. 2. On the numeric keypad, tap #, then tap CANCEL/SECURE. The beep is enabled/disabled. Before Cooking • Before its first use, turn the oven on for 1 hour at 500°F to burn off manufacturing residueand remove undesirable odors that the oven would otherwise emit the first few times it is used. • When baking/roasting, the oven preheats automatically. Preheating time varies with the temperature setting and your home's type of electrical supply. Preheating cannot be used for broiling. To avoid marring the oven's porcelain finish, quickly wipe up acidic foods (e.g., citrus, tomato, pineapple). Positioning the Oven Racks You may use either rack type on any level inside the ove. Handle the racks only when the oven is cool. If you must reposition a rack when the oven is hot, use potholders. Inserting a Standard Oven Rack 1. Grasp the handle area at front of the rack, and slide the rack onto the left-/right-side supports. 2. Begin sliding the rack in, then lift up so the safety notches clear the ends of the rack supports. 3. With both hands, push the rack all the way in. Removing a Standard Oven Rack 1. Grasp the handle area at front of the rack, and pull gently until the rack stops at the safety notches. 2. Lift the front of the rack 6 inches to clear the safety notches, and pull the rack completely out. 22 English