Dacor HDPR36 Installation Instruction - Dual-fuel Range - Page 33

Installation Instructions Verifying Proper Operation Before operating the range, read the User Manual completely to familiarize yourself with important safety, service, and warranty information. 1. Turn off all burners, and verify that all burner components are properly assembled. 2. Open the gas-supply valve, and verify that there are no gas leaks. 3. Turn on power to the range at the power source. 4. Follow the prompts on the oven display to establish user preferences and wireless-network settings. 5. On the display, touch MENU > BAKE. The default bake temperature appears on the display. 6. Touch Start, and wait 3 minutes. 7. Open the door to verify that the oven is heating. BAKE and the preheating temp appear on the display. 8. Touch CANCEL-SECURE or CANCEL RIGHT (48" models). The oven's heating elements turns off. 9. Push-turn a burner-control knob to maximum flame. Shortly, the burner ignites, and the ignitor stops sparking. Proper Flame If the burner does not ignite in 4 seconds, turn it off, wait 5 minutes for gas to dissipate, then try again. 10. Turn the knob from max to minimum flame, observing the flame as the knob turns. A proper flame is steady and quiet, with a sharp, blue inner cone that varies in length with the burner size. Dacor's Smart Flame™ feature reduces the flame under the grate fingers to increase grate life. If the range is equipped for LP gas, normal flame tips may be yellow. 11. Turn off the burner, and run the test for the other burners. English 33