Dacor IVS2 Installation Instructions - Page 5

Product Specifications General Specifications Filters Mesh type, dishwasher safe Lights 120 Vac, 75 Watt, halogen Total Circuit 120 Vac, 60 Hz., 15 Amp. Min. Requirements* grounded , dedicated circuit IVS1: 0.2 kW (2 Amp.) Total Connected Load* IVS2: 0.4 kW (3 Amp.) IVSR1/IVSR2 0.2 kW (1.5 Amp.) plus the power requirements of the in-line or remote blower connected. IVS1: 600 CFM, IVS2: 1200 CFM Blower Rating** IVSR1 and IVSR2: Dependant on in-line or remote blower selected * Electrical specifications provided for reference only, consult product data label on the unit for exact specifications. ** At zero inches static pressure The Dacor Integrated Ventilation System (IVS) is designed for installation inside custom hood canopies. Proper installation of the IVS requires proper selection of the custom canopy materials and proper construction. Carefully and closely follow all instructions and warnings concerning the installation of the IVS within a combustible or noncombustible hood canopy. Make sure that all construction meets applicable local codes and regulations. Product Dimensions All dimensional tolerances are + 1/16", - 0" (+1.6 mm, -0) unless otherwise stated. 21 1/4" (54.0 cm) 22 1/2" (57.2 cm) 8" (20,3 cm) round exhaust with back draft damper Electrical access holes 6" (15.2 cm) 11 1/16" (28.1 cm) 12 1/4" (31.1 cm) 33 1/4" (84.5 cm) 34 1/2" (87.6 cm) 8" (20,3 cm) round exhausts with back draft damper Electrical access holes 6" (15.2 cm) 11 1/16" (28.1 cm) 12 1/4" (31.1 cm) IVS1, IVSR1 Overall Dimensions IVS2, IVSR2 Overall Dimensions 6 1/2" 6 1/2" (16.5 cm) (16.5 cm) CL CL CL CL CL 8" Exhaust IVS1, IVSR1 Exhaust Placement Top View 8" Exhaust IVS2, IVSR2 Exhaust Placement Top View CL 3