Dacor IVS2 Installation Instructions - Page 9
Installation Checklist, Verifying Proper Operation - hood parts
View all Dacor IVS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installation Instructions Verifying Proper Operation 1. Install the filters. 2. Install the light bulbs. • Attach the included suction cup to one of the provided light bulbs. • Insert it into one of the light fixtures. • Screw it into place and remove the section cup. • Repeat for the remaining light fixtures. Installation Checklist WARNING • To ensure a safe and proper installation, the following checklist should be completed by the installer to ensure that no part of the installation has been overlooked. • Proper installation is the responsibility of the homeowner. The importance of proper installation of your Dacor appliance cannot be overemphasized. Is the IVS properly attached to the cutout or hood liner according to the instructions on page 6? Is the duct work completely installed? Are all joints attached with sheet metal screws and wrapped with duct tape? See page 6. Is the range hood wired and grounded according to these instructions and in accordance with all applicable electric codes? See pages 4 and 6. Are the filters properly installed according to the use and care manual? Has proper operation been verified? Has the warranty been activated on-line or the warranty card filled out completely and mailed? 3. Verify that the IVS control knobs are in the OFF position (fully counter-clockwise). 4. Turn on the main power supply at the circuit breaker panel or fuse box. 5. Turn the light and fan knobs clockwise and make sure the lights and fans operate properly. If the hood does not operate properly, follow these troubleshooting steps: • Verify that power is being supplied to the IVS. • Check the electrical connections to ensure that the installation has been completed correctly. • Repeat the above test. • If the installation still does not work, contact Dacor Distinctive Service at (877) 337-3226. Do not attempt to repair the unit yourself. Be sure to have all model and serial numbers from the product data labels available when you call. Dacor is not responsible for the cost of correcting problems caused by a faulty installation. 7