Dacor MCS130 User Manual - Classic Wall Oven - Page 19
Oven Failure Codes
View all Dacor MCS130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Before You Call For Service IMPORTANT: If a failure code is displayed, the oven will beep continuously until the user presses the CANCEL • SECURE key. The oven will not heat after a failure code is displayed. Call a qualified appliance technician to repair the oven. Clock Display F0. F1. F2. F3. F4. F6. F7 F8. Cause Touch pad is stuck in depressed position. Relay circuit failure. Oven temperature exceeded the clean runaway temperature (self-clean mode only) or the cooking runaway temperature (cooking modes only). Short circuit in the oven temperature sensor. Open circuit in the oven temperature sensor. Failure in the EEPROM check comparison. (Only time of day and timer will operate.) Failure of the self-clean automatic door latch circuit. Failure of the door latch motor. Occurs when the motor runs for two minutes without the door locking in self-clean mode. Oven Failure Codes 17