Dacor METB365-1 Installation Instructions - Page 10

Verifying Proper Operation

Get Dacor METB365-1 PDF manuals and user guides View all Dacor METB365-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Installation Instructions Verifying Proper Operation warning Read the accompanying use and care manual completely before using the cooktop. 1. Clean the cooking surface according to the use and care manual prior to use. 2. Turn on the power to the cooktop at the circuit breaker or fuse box. When the unit is powered on for the first time, the cooktop controls will go through a self-check routine. For safety, when the self-check is complete, the cooktop controls will go into locked mode. Unlock the element controls: ◊ On ETT series models, push and hold the Dacor logo key for three seconds. Three beeps should sound and the Dacor logo indicator light should go out. ◊ On MET series models, push and hold the CANCEL • SECURE key for three seconds. Three beeps should sound and the CANCEL • SECURE indicator light should go out. 3. Turn on the left rear element by pressing the left rear ON/OFF key. Press the 8 setting key (on the same row) to select heat level 8. Verify that the element begins to heat, then turn it off by pressing the ON/OFF key. 4. Repeat step 3 for the remaining burners. The left front burner has two different elements, an inner one and an outer one. To activate the outer element: ◊ Press the ON/OFF key for the left front element and press the 8 number setting. ◊ Activate the outer element by pressing the outer element key (the circle) on the right side of the element control. ◊ On model METB365-1, turn on both the right front and left front elements on setting 8, then press the bridge element key to verify it is working. 5. For safety, lock the controls after testing is complete. NOTE: If the cooktop does not operate properly, follow these troubleshooting steps: ◊ Verify that power is supplied to the cooktop. ◊ Check for proper electrical connections. ◊ Make sure the cooktop controls are not locked (see step 2). ◊ Repeat the above tests. ◊ If the appliance still does not work, contact Dacor Distinctive Service at (877) 337-3226. Do not attempt to repair the appliance yourself. If you need service, be sure to have the model and serial numbers available when you call. They are located on the bottom of the appliance. ON/OFF ON/OFF ON/OFF ON/OFF 8 9 10 7 56 1 2 34 8 9 10 56 7 234 1 8 9 10 67 5 1 2 34 8 9 10 56 7 234 1 Outer element key Cooktop Controls - Model ETT304-1 ON/OFF ON/OFF ON/OFF ON/OFF ON/OFF 8 9 10 56 7 234 1 8 9 10 67 5 1 2 34 7 8 9 10 56 234 1 8 9 10 67 5 234 1 7 8 9 10 56 234 1 Outer element key Cooktop Controls - Model ETT365-2 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
8
Installation Instructions
Verifying Proper Operation
WARNING
Read the accompanying use and care manual completely
before using the cooktop.
Clean the cooking surface according to the use and
1.
care manual prior to use.
Turn on the power to the cooktop at the circuit breaker
2.
or fuse box. When the unit is powered on for the first
time, the cooktop controls will go through a self-check
routine. For safety, when the self-check is complete,
the cooktop controls will go into locked mode. Unlock
the element controls:
On ETT series models, push and hold the Dacor
◊
logo key for three seconds. Three beeps should
sound and the Dacor logo indicator light should go
out.
On MET series models, push and hold the
◊
CANCEL • SECURE
key for three seconds. Three
beeps should sound and the
CANCEL • SECURE
indicator light should go out.
Turn on the left rear element by pressing the left rear
3.
ON/OFF
key. Press the
8
setting key (on the same row)
to select heat level
8
. Verify that the element begins to
heat, then turn it off by pressing the
ON/OFF
key.
Repeat step 3 for the remaining burners. The left front
4.
burner has two different elements, an inner one and an
outer one. To activate the outer element:
Press the
◊
ON/OFF
key for the left front element
and press the
8
number setting.
Activate the outer element by pressing the outer
◊
element key (the circle) on the right side of the ele-
ment control.
On model METB365-1, turn on both the right front
◊
and left front elements on setting
8
, then press the
bridge element key to verify it is working.
For safety, lock the controls after testing is complete.
5.
NOTE:
If the cooktop does not operate properly, follow
these troubleshooting steps:
Verify that power is supplied to the cooktop.
◊
Check for proper electrical connections.
◊
Make sure the cooktop controls are not locked (see
◊
step 2).
Repeat the above tests.
◊
If the appliance still does not work, contact Dacor
◊
Distinctive Service at (877) 337-3226. Do not
attempt to repair the appliance yourself. If you need
service, be sure to have the model and serial num-
bers available when you call. They are located on
the bottom of the appliance.
10
8
7
6
5
4
ON/OFF
9
1
2
3
10
8
7
6
5
4
9
1
2
3
10
8
7
6
5
4
9
1
2
3
10
8
7
6
5
4
9
1
2
3
10
8
7
6
5
4
9
1
2
3
ON/OFF
ON/OFF
ON/OFF
ON/OFF
10
8
7
6
5
4
ON/OFF
ON/OFF
ON/OFF
ON/OFF
9
1
2
3
10
8
7
6
5
4
9
1
2
3
10
8
7
6
5
4
9
1
2
3
10
8
7
6
5
4
9
1
2
3
Cooktop Controls - Model ETT304-1
Cooktop Controls - Model ETT365-2
Outer element
key
Outer element
key