Dacor MORS227 Installation Instructions - Page 15

Reinstalling the Oven Doors, Installing the Exhaust Grill

Page 15 highlights

Installation Instructions Installing the Exhaust Grill With the oven secured to the cabinet, install the exhaust grill by mounting it to the oven with the two (2) provided screws. Reinstalling the Oven Doors warning Failure to fully rotate the hinge catches will result in a safety hazard and may cause personal injury due to the door falling off its hinges. Also damage to the oven and/or improper door alignment may occur. caution On double ovens, install the top door first to reduce the chance of damaging the lower door during installation. NOTE: To re-install the oven door on model EORS136, see page 14. 1. Grasp the oven door on opposite sides and lift it until the door hinges are aligned with the openings in the oven frame. 2. Holding the door at about a 30˚ angle from the horizontal, slide the hinges into the openings until the bottom hinge arms drop fully into the hinge receptacles. Insert door at 30° angle 30º 3. Lower the door to the fully opened position. Rotate both hinge catches toward the oven. Open and close the door slowly and completely to ensure that it is properly installed. Catch 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

13
Reinstalling the Oven Doors
WARNING
Failure to fully rotate the hinge catches will result in a
safety hazard and may cause personal injury due to the
door falling off its hinges. Also damage to the oven and/or
improper door alignment may occur.
CAUTION
On double ovens, install the top door first to reduce the
chance of damaging the lower door during installation.
NOTE: To re-install the oven door on model EORS136,
see page 14.
Grasp the oven door on opposite sides and lift it until
1.
the door hinges are aligned with the openings in the
oven frame.
Holding the door at about a 30˚ angle from the horizon
-
2.
tal, slide the hinges into the openings until the bottom
hinge arms drop fully into the hinge receptacles.
Lower the door to the fully opened position. Rotate
3.
both
hinge catches toward the oven. Open and close the
door slowly and completely to ensure that it is properly
installed.
Installation Instructions
Installing the Exhaust Grill
With the oven secured to the cabinet, install the exhaust
grill by mounting it to the oven with the two (2) provided
screws.
Catch
30º
Insert door at
30° angle