Dacor RNRP30GC Use and Care Manual - Page 9
Installing the Oven Racks
View all Dacor RNRP30GC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Setting Up Your Range Installing the Oven Racks WARNING The oven racks become hot when the oven is in use. The rack supports provide seven heights for positioning of the oven racks. Standard Oven Rack To install a standard oven rack: 1. Insert the end of the rack with the safety notches into the oven first. 2. Attach both sides of the rack to the rack supports in the oven as shown below. 3. Begin to slide the rack in, and then, lift up so that the safety notches clear the ends of the rack supports. 4. Push the rack all the way in with both hands. To remove a standard oven rack: 1. Grasp it with both hands and pull gently straight out toward you until it stops. 2. To remove the rack completely, lift the front of the rack up about six inches and continue to pull it out. Lifting the rack releases the safety notches. The safety notches reduce the chances of a rack coming out of the oven accidentally. GlideRack™ Oven Racks Your oven comes with Dacor GlideRack oven racks. When you use them, you can effortlessly slide heavy pots, pans or other items out to check, stir or add ingredients quickly and safely. To insert a GlideRack oven rack: 1. Extend the rack guides completely as shown below. 2. Align both sets of safety clips (right and left) on the back of the rack guides with the oven rack supports as shown. 3. Insert the rack into the oven, sliding the rack supports between the rear safety clips as shown. As you slide the rack in, hold the front of the rack up slightly until the front safety clips just clear the front of the rack supports. 4. Lower the front of the rack so that the front of the rack support is between the front safety clip and the rack stop. 5. Grasp the rack in the center of the front and pull. The rack should come forward while the guides remain in place. To remove a GlideRack oven rack: • Grasp the rack with both hands and pull it gently straight out toward you until it stops. • Lift up until the front safety clips just clear the front of the oven rack supports. Continue to pull out. Moving the end of the rack slightly, left to right, as you pull, will make it easier to remove. Back of rack Rack guides (fully extended) Lift front safety clips over rack supports Front of rack Rack support Front of rack Back of guide Safety notch Slide oven rack supports into slots on the rack Standard Oven Rack Installation 7 Rack support Slide rack supports (inside oven) between back safety clips GlideRack Oven Rack Installation