Dacor RO130 Installation Instructions - Page 6

Product Specifications Electrical Specifications • It is the owner's responsibility to ensure that a licensed electrician performs the installation of the electrical supply for this appliance. The electrical installation, including minimum supply wire size, must comply with the National Electric Code ANSI/NFPA 70 (latest revision) and local codes and ordinances. A copy of this standard may be obtained from: National Fire Protection Association 1 Batterymarch Park Quincy, Massachusetts 02269-9101 • The correct voltage, frequency and amperage must be supplied to the appliance from a dedicated, grounded, single phase circuit that is protected by a properly sized circuit breaker or time-delay fuse. If a time-delay fuse is utilized, fuse both sides of the line (L1 and L2). • Preheat times and cavity temperature recovery times will be increased slightly if operating the unit with less than a 240 Vac circuit. • This appliance is provided with electrical wiring in a flexible metal conduit. Model Number RO130S RO130B ROV130B Dedicated Circuit Total Connected Requirements Load 240 Vac 60 Hz, 4 wire*, 30 Amp. 6.0 kW (25.0 Amp.) RO230S RO230B ROV230B 240 Vac 60 Hz, 4 wire*, 60 Amp. 12.0 kW (50.0 Amp.) * Two 120 Vac hot (L1 and L2), one neutral, one ground. The above specifications are for reference only. See the appliance data plate (page 3) for exact specifications. Product Dimensions All tolerances: ±1/16 (±1.6 mm), unless otherwise stated. Model Number RO130S RO130B ROV130B RO230S RO230B ROV230B (A) Overall Width (B) Chassis (C) Overall (D) Chassis Width Height Height 29 7/8" 28 3/8" 27 5/8" (70.2 26 5/8" (75.9 cm) (72.1 cm) cm) (67.6 cm) 29 7/8" 28 3/8" (75.9 cm) (72.1 cm) 49 7/8" 49" (126.7 cm) (124.5 cm) (E) Control Panel Overlay 1" (2.5 cm) 7/8" (2.2 cm) All Models (F) Utility Cutout Width 6 1/4" (15.9 cm) (G) Utility Cutout Height 4 3/4" (12.1 cm) (H) Utility Cutout Depth 7 3/4" (19.7 cm) (J) Control Panel Depth 1 3/16" (3.0 cm) (K) Chassis Depth 23 5/8" (60.0 cm) 4