Dacor RO130 Installation Instructions - Page 8
Installation Specifications - ro130s oven
View all Dacor RO130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installation Specifications Installation Planning warning Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information. important • Locate the junction box so that the oven may be easily disconnected in the event that it needs to be removed from the wall completely for service. • Install the junction box in a location that allows the oven to be removed from the cut out for service without being disconnected. • Plan the installation so that all minimum clearances are met or exceeded. Dimensions shown provide minimum clearances, unless otherwise noted. Be certain that proper clearance is provided for the oven door when it is in the open position according the Product Dimensions. • Cabinet cutout dimensions must be used as indicated. The specified minimum cabinet depth and width must be provided. The cabinet depth and width must completely enclose the recessed portion of the oven. • If the oven is not installed level it may deliver poor or inconsistent baking results. • All contact surfaces between the appliance and the cabinet must be solid and level. • Carefully check the location where the oven is to be • Provide a platform within the cabinet to support the installed. The oven should be placed for convenient oven. It must be installed level and straight. The top access. Make certain that electrical power, meeting the edge of the platform must be flush with the cut out at specifications on page 4, can be provided in the the front of the cabinet. There are no provisions to level selected location. the oven after it has been installed. 3/4" (1.9 cm) thick • Dacor recommends installing the electrical junction box plywood is recommended. in the one of the locations shown. Cabinet Dimensions Cabinet tolerances: +1/16 (1.6 mm), -0, unless otherwise stated. Model Number RO130S RO130B ROV130B RO230S RO230B ROV230B (N) Minimum Cabinet Width 30" (76.2 cm) 30" (76.2 cm) (P) Minimum Cutout Width (R) Minimum Cutout Height 28 1/2" (72.4 cm) 26 7/8" (68.3 cm) 28 1/2" (72.4 cm) 49 1/8" (124.8 cm) Minimum interior cabinet depth: 24" (61.0 cm) 6