Danby DAC5200DB Product Manual - Page 13
SLEEP OPERATION, TIMER OPERATION, To set the Auto-start time.
View all Danby DAC5200DB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Operating Instructions USING THE REMOTE CONTROLLER BUTTONS SLEEP OPERATION • In this mode, the selected temperature will increase(in cooling mode) / decrease by 2°F 1 hour after the mode is selected. • The temperature will then increase by another 2°F after additional 1 hour. • This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends 1 the Sleep mode and the unit will continue to operate as originally programmed. • The Sleep mode program can be cancelled at any time during operation by again pressing the Sleep button. TIMER OPERATION press the TIMER button can set the Autostart and Auto-stop time of the unit. NOTE: • To set Auto-start time, the unit must be in the OFF position. • To set Auto-stop time, the unit must be in the ON postion. To set the Auto-start time. 1. Push the TIMER button when the unit is 1 off, only the Auto-start feature can be set. 2. Keep pressing the TIMER button,each press will increase the selected time by 0.5 hour increments,when selected time is added to 10 hours,each press will increase the selected time by 1 hour increments,up to 24 hours. 3. The time can be set in a range of 0~24 hours. 4. After the desired time has established, wait for about 10 seconds until the setting temperature reverts back in the display window of the air conditioner. This indicates the program is set. 12