Danby DAC5200DB Product Manual - Page 14
TIMER OPERATION, To set the Auto-start time., ENERGY SAVER OPERATION
View all Danby DAC5200DB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Operating Instructions USING THE REMOTE CONTROLLER BUTTONS TIMER OPERATION To set the Auto-start time. 1) Push the TIMER button when the unit is operational, only the Auto-stop feature can be set. 2) Keep pressing the TIMER button, each 1 press will increase the selected time by 1 hour increments, up to 24 hours. 3) The time can be set in a range of 0~24 hours. 4) After the desired time has established, wait for about 10 seconds until the setting temperature reverts back in the display window of the air conditioner. This indicates the program is set. NOTE: To cancel the TIMER setting, push the TIMER button until 0 hour is displayed on the LCD window of the air conditioner. ENERGY SAVER OPERATION 1 In this mode, the fan will continue to run for 3 minutes after the compressor shuts off. The fan then cycles on for 2 minutes at 10 minute intervals until the room temperature is above the set temperature, at which time the compressor turns back on and cooling stars. 13