Danby DAC6011E Product Manual - Page 29
the OFF position.
View all Danby DAC6011E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Consignes d'utilisation USING THE REMOTE CONTROLLER BUTTONS ON/OFF MODE 1 TEMP UP FAN TEMP DOWN SWING TIMER SLEEP SWING OPERATION Use the SWING button to adjust the Left/Right airflow direction. 1) Press this button while the unit is operational, the vertical louvers automatically swing right and left sweeping the cold/hot air alternately to obtain comfortable cooling/heating. 2) Press the SWING button again to stop the swing operation. ON/OFF MODE TEMP UP FAN S TEMP DOWN ENERGY SAVER TIMER CLEAN AIR SLEEP SLEEP OPERATION • In this mode, the selected temperature will increase(in cooling mode) / decrease (in heating mode) by 2°F 30 minutes after the mode is selected. • The temperature will then increase by another 2°F after an additional 30 minutes. • This new temperature will be maintained for 7 hours before it returns to the 1 originally selected temperature. This ends the Sleep mode and the unit will continue to operate as originally programmed. • The Sleep mode program can be cancelled at any time during operation by again pressing the Sleep button. ON/OFF MODE TEMP UP FAN S TEMP DOWN ENERGY SAVER TIMER CLEAN AIR SLEEP TIMER OPERATION press the TIMER button to set the Autostart and Auto-stop time of the unit. NOTE: • To set Auto-start time, the unit must be in the OFF position. • To set Auto-stop time, the unit must be in the ON postion. To set the Auto-start time. 1. Push the TIMER button when the unit is 1 off, only the Auto-start feature can be set. 2. Keep pressing the TIMER button, each press will increase the selected time by 1 hour increments, up to 12 hours. 3. The time can be set in a range of 0~12 hours. 4. After the desired time has established, wait for about 10 seconds until the setting temperature reverts back in the display window of the air conditioner. This indicates the program is set. 28