Danby DAR195BL Product Manual - Page 4

Before, Putting

Get Danby DAR195BL PDF manuals and user guides View all Danby DAR195BL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

Before Putting Into Use • Before connecting the appliance to electrical power supply, leave it stand for about 2 hours, which will reduce the possibility of malfunctions in the cooling system due to transport handling. • Clean the appliance thoroughly, especially in the interior (See Cleaning and Maintenance). • In case the interior accessories are not correctly placed, rearrange them as described in chapter "Description of the Appliance". • If the gasket is damaged or the door seal is poor, energy consumption is substantially higher. To restore efficiency, replace the gasket. • Always consider instructions stated in sections Positioning and Energy Saving Tips, otherwise the energy consumption is substantially higher. Instructions for Use These instructions for use are intended for the user. They describe the appliance and correct operating procedures for safe use. SAVE THESE INSTRUCTIONS: We Care for the Environment • Our products use environmentally friendly manner. To this end, individual packaging materials are clearly marked. • These instructions are printed either on recycled paper or chlorine free bleached paper. • When your appliance finally wears out, please try not to burden the environment with it; call your nearest authorized service agent. (See Disposing of Worn Out Appliance) Tips for Energy Savings • Try not to open the door too often, especially when the weather is hot and humid. Once you open the door, close it as soon as possible. This is especially important if you have an upright model. • Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance). • Set the thermostat from higher to lower settings as soon as possible (depends on how loaded the appliance is, ambient temperatures etc). • Before loading the appliance with packages of fresh foods, make sure that they are cooled to ambient temperature. (excluding soups) • Ice and frost layers increase energy consumption, so clean the appliance as soon as the frost layer is 3-5 mm thick. 2 OAP "Of rVNL

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
Before
Putting
Into
Use
•
Before
connecting
the
appliance
to
electrical
power
supply,
leave
it
stand
for
about
2
hours,
which
will
reduce
the
possibility
of
malfunctions
in
the
cooling
system
due
to
transport
handling.
•
Clean
the
appliance
thoroughly,
especially
in
the
interior
(See
Cleaning
and
Maintenance).
•
In
case
the
interior
accessories
are
not
correctly
placed,
rearrange
them
as
described
in
chapter
"Description
of
the
Appliance".
Instructions
for
Use
These
instructions
for
use
are
intended
for
the
user.
They
describe
the
appliance
and
correct
operating
procedures
for
safe
use.
SAVE
THESE
INSTRUCTIONS:
We
Care
for
the
Environment
•
Our
products
use
environmentally
friendly
manner.
To
this
end,
individual
packaging
materials
are
clearly
marked.
•
These
instructions
are
printed
either
on
recycled
paper
or
chlorine
free
bleached
paper.
•
When
your
appliance
finally
wears
out,
please
try
not
to
burden
the
environment
with
it;
call
your
nearest
authorized
service
agent.
(See
Disposing
of
Worn
Out
Appliance)
Tips
for
Energy
Savings
•
Try
not
to
open
the
door
too
often,
especially
when
the
weather
is
hot
and
humid.
Once
you
open
the
door,
close
it
as
soon
as
possible.
This
is
especially
important
if
you
have
an
upright
model.
•
Every
now
and
then
check
if
the
appliance
is
sufficiently
ventilated
(adequate
air
circulation
behind
the
appliance).
•
Set
the
thermostat
from
higher
to
lower
settings
as
soon
as
possible
(depends
on
how
loaded
the
appliance
is,
ambient
temperatures
etc).
•
Before
loading
the
appliance
with
packages
of
fresh
foods,
make
sure
that
they
are
cooled
to
ambient
temperature.
(excluding
soups)
•
Ice
and
frost
layers
increase
energy
consumption,
so
clean
the
appliance
as
soon
as
the
frost
layer
is
3-5
mm
thick.
•
If
the
gasket
is
damaged
or
the
door
seal
is
poor,
energy
consumption
is
substantially
higher.
To
restore
efficiency,
replace
the
gasket.
•
Always
consider
instructions
stated
in
sections
Positioning
and
Energy
Saving
Tips,
otherwise
the
energy
consumption
is
substantially
higher.
2
OAP
"Of
rVNL