Danby DPAC7099 Product Manual - Page 10

OPERATING INSTRUCTIONS (cont'd) DEHUMIDIFIER Note: During dehumidifier mode, the exhaust hose does not have to be vented outdoors. 1) Press the POWER SWITCH key (Fig. G) to switch the unit on. 2) Press the MODE key (Fig. H) until the DRY indicator light illuminates on the control panel (Fig. I). Each depression of the MODE key will advance to a different mode setting (Cool - Dehumidify - Fan - Auto ) Important: The drain hose must be installed during dehumidifier mode 3) If the room temperature is > 25°C (77°F), fan speed can be adjusted. Press the FAN key (Fig. J) to select the desired FAN SPEED setting. Your selection will appear on the control panel. Each depression of the fan key will advance to a different fan speed (High - Med. - Low ) as shown in Fig. K. Otherwise fan speed is fixed to low. Note: The warm air exchange hoses must vent inside the room when using Dehumidify mode. Fig. G Fig. H Fig. I Fig. J Fig. K FAN Note: During Fan mode, the exhaust hose does not have to be vented outdoors. 1) Press the (on/off) key pad to switch on the unit (Fig. G). 2) Press the MODE key (Fig. H) until the DRY indicator illuminates on the control panel (Fig. I). Each depression of the MODE key will advance to a different mode setting (Cool - Dehumidify - Fan - Auto ) 3) Press the FAN key (Fig. K) to select the desired FAN SPEED setting. Your selection will appear on the control panel. Each depression of the fan key will advance to a different fan speed (High - Med. - Low ) as shown in Fig. L. 9 Fig. L