Danby DPAC7099 Product Manual - Page 7

OPERATION- Features of the Control Panel LCD Display Water Full Indicator ON/OFF Switch EMERGENCY ON/OFF Switch • This switch is used when unit needs to be temporarily switched on/off. • Pressing the emergency will turn on the unit. The running mode and fan speed mode will be set automatically. • Pressing the emergency button again will stop the unit. Note: When the unit is on, remember to lift up the air outlet flap. WATER FULL INDICATOR • When illuminated, signifies condensed water inside the unit can't be discharged and the condensation water level has reached full water level. • The unit stops operating when this indicator flashes. After discharging the water, press the POWER button to restart the unit. The operating mode will be that which was in operation before water full indicator illumination. • LED light colour is RED LCD DISPLAY Cooling Mode Dehumidify Mode Fan only Mode Auto Mode High Fan Speed Medium Fan Speed Low Fan Speed Display set temperature Display timer setting of auto switch On/Off Mode Control The Mode Control has 4 settings: • Cool • Dehumidify • Fan • Auto The settings are adjusted by the Mode Control button Fan Speed Control The Fan Speed Control has 4 settings: • Auto (Cool only) • High • Medium • Low Temp. Set Controls Press " " or " " to set temperature. The setting ranges from 16°C (61°F) to 32°C (89°F). Note: When choosing Auto, Dehumidify or Fan Mode, temperature setting button is invalid. 6