Danby DWC1233BL-SC Product Manual - Page 5
Operation - 12 bottle wine cooler
![]() |
View all Danby DWC1233BL-SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
O P E R AT I O N Control Buttons Changing Between ºC and ºF • To change between °C (Celsius) to °F (Fahrenheit), tap the ºC/ºF pad once. ºC/ºF Turning the Light On or Off Cooler (-1ºC/ºF) This touch-pad decreases the set temperature. Warmer (+1ºC/ºF) This touch-pad increases the set temperature. You can set your display light to be continuously lit, or lit only when the door is open. To adjust the light setting: • Tap the Light pad once to change the light setting. Celsius and Fahrenheit ºC means degrees Celsius and ºF means degrees Fahrenheit. Light This pad turns the interior light on or off. Setting the Temperature The temperature can be set between 10ºC and 18ºC (50ºF and 64ºF): Loading Wine should be loaded with corks facing the door. This wine cooler is designed to hold no more than 12 standard 750ml wine bottles. Load the wine cooler as follows: • Load up to 3 bottles per rack • Load up to 3 bottles on the base of the wine cooler. • To increase the set temperature, tap the Warmer touch-pad until you reach your desired temperature. NOTE: When changing the temperature the present set temperature flashes in the LCD display. Press the Cooler or Warmer pad to change the set temperature. After a few seconds the set temperature stops flashing, and the display resumes showing the actual temperature inside the wine cooler. • To decrease the set temperature, tap the Cooler touch-pad until you reach the desired temperature. 4
![](/manual_guide/products/danby-dwc1233blsc-product-manual-a81d16e/5.png)