DeLonghi DFP250 Owner Manual - Page 8

To use the citrus press 1 Fit the drive shaft and bowl onto the power unit. 2 Fit the sieve into the bowl - ensuring the sieve handle is locked into position directly over the bowl handle. 3 Place the cone over the drive shaft turning until it drops all the way down. 4 Cut the fruit in half. Then switch on and press the fruit onto the cone. - The citrus press will not operate if the sieve is not locked correctly. Care & cleaning - Always switch off and unplug before cleaning. - Handle the blades and cutting discs with care - they are extremely sharp. - Some foods may discolor the plastic. This is perfectly nor- mal and won't harm the plastic or affect the flavor of your food. Rub with a cloth dipped in vegetable oil to remove the discoloration. - Any other servicing should be performed by an authorized service representative. Service & customer care - If the cord is damaged it must, for safety reasons, be replaced by De' Longhi or an authorized De' Longhi service center. If you need help with: - using your appliance or - servicing or repairs - Contact the customer service hotline listed on the warranty page. Designed and engineered by De' Longhi in the UK. Made in China. Power unit - Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food debris. - Store excess cord in the storage area at the back of the machine (I). Blender 1 Empty the carafe before unscrewing it from the blade unit. 2 Wash the carafe by hand. 3 Remove and wash the sealing ring. 4 Don't touch the sharp blades - brush them clean using hot soapy water, then rinse thoroughly under the tap. Don't immerse the blade unit in water. 5 Leave to dry upside down. Twin beater geared whisk - Detach the beaters from the drive head by gently pulling them free. Wash in warm soapy water. - Wipe the drive head with a damp cloth, then dry. Do not immerse the drive head in water. Bowl/lid and attachments - Wash by hand, then dry. - Alternatively they can be washed on the top rack of your dishwasher. A short low temperature program is recommended. 8