DeLonghi ESAM3300 Owner Manual - Page 20

Solution, Problem, Cause, Lights, Description, Meaning, Action, Problems That Can Be Resolved Before - not working

Page 20 highlights

20 LIGHTS 10 11 DESCRIPTION MEANING ACTION The light is on steady and the green lights are flashing. After cleaning, the infuser has Insert the infuser, see section 10.2 probably been left out of the coffee maker The inside of the machine is very dirty. Thoroughly clean the inside of the machine, as described in section 10.2 The light is flashing The ground coffee funnel is Empty the funnel with the help of a clogged. knife, as described in par. 7 note 5 (Fig.20). 13 PROBLEMS THAT CAN BE RESOLVED BEFORE CALLING THE SERVICE CENTER If the machine is not working and an alarm light is on, the causes of the malfunction can be identified and resolved by referring to section 12. If, on the other hand, no alarm light is on, run the following checks before calling the service center. PROBLEM CAUSE SOLUTION • The espresso / coffee is no hot. • The cups have not been preheated. Heat the cups by rinsing them in hot water or leaving them to rest for at least 20 minutes on the cup warmer tray (see section 5 note 3). • The infuser is too cold. Heat the infuser by pressing the button before making the coffee (Fig. 14, see note 3, section 5). • The machine uses too little cof- Turn the espresso/coffee flavor knob (Fig. fee during the infusion process. 7) a little clockwise (see section 5 note 2) • The coffee is not creamy enough • The coffee is ground too coarse. Turn the grinding coarseness regulator (Fig. 17) one click counter-clockwise (see section 6). • The ground coffee is not correct Use another brand of coffee blend. • The coffee comes out too slow- • The coffee is ground too fine. Turn the grinding adjustment knob (Fig. 17) one ly click clockwise (see chap. 6). • The machine uses too much cof- Turn the espresso/coffee flavor knob (Fig. 7) a fee during the infusion process. little counter-clockwise. • The coffee comes out too quickly. • The coffee is ground too coarse. Turn the grinding adjustment knob (Fig. 17) one click counter-clockwise (see section 6). • The machine uses too little cof- Turn the espresso/coffee flavor knob (Fig. 7) a fee during infusion. little clockwise. OPERATING INSTRUCTIONS

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

20
OPERATING INSTRUCTIONS
SOLUTION
Heat the cups by rinsing them in hot water
or leaving them to rest for at least 20 min-
utes on the cup warmer tray
(see section 5
note 3).
Heat the infuser by pressing the
button
before making the coffee (Fig. 14, see note 3,
section 5).
Turn the espresso/coffee flavor knob (Fig.
7) a little clockwise (see section 5 note 2)
Turn the grinding coarseness regulator (Fig.
17) one click counter-clockwise (see section
6).
Use another brand of coffee blend.
Turn the grinding adjustment knob (Fig. 17) one
click clockwise (see chap. 6).
Turn the espresso/coffee flavor knob (Fig. 7) a
little counter-clockwise.
Turn the grinding adjustment knob (Fig. 17) one
click counter-clockwise (see section 6).
Turn the espresso/coffee flavor knob (Fig. 7) a
little clockwise.
PROBLEM
The espresso / coffee is no
hot.
The coffee is not creamy
enough
The coffee comes out too slow-
ly
The coffee comes out too
quickly.
CAUSE
The cups have not been pre-
heated.
The infuser is too cold.
The machine uses too little cof-
fee during the infusion process.
The coffee is ground too
coarse.
The ground coffee is not correct
The coffee is ground too fine.
The machine uses too much cof-
fee during the infusion process.
The coffee is ground too
coarse.
The machine uses too little cof-
fee during infusion.
If the machine is not working and an alarm light is on, the causes of the malfunction can be identified and resolved by
referring to section 12. If, on the other hand, no alarm light is on, run the following checks before calling the service
center.
LIGHTS
DESCRIPTION
MEANING
ACTION
The
light is on
steady and the green
lights are flashing.
Insert the infuser, see section 10.2
The inside of the machine is very
dirty.
Thoroughly clean the inside of the
machine, as described in section
10.2
After cleaning, the infuser has
probably been left out of the coffee
maker
13 PROBLEMS THAT CAN BE RESOLVED BEFORE CALLING THE SERVICE CENTER
10
The
light is
flashing
The ground coffee funnel is
clogged.
Empty the funnel with the help of a
knife, as described in par. 7 note 5
(Fig.20).
11