DeLonghi PAC A130HPE Owner Manual - Page 8

Using the remote control

Get DeLonghi PAC A130HPE PDF manuals and user guides View all DeLonghi PAC A130HPE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Using the remote control INSERTING OR REPLACING THE BATTERIES • Remove the cover on the rear of the remote control. • Insert two "AAA" 1.5V batteries, making sure they are in the cor- rect position (see the instructions inside the battery compartment). • Replace the cover.  If the remote control unit is replaced or discarded, the batteries must be removed and disposed of in accordance with current legislation as they are harmful to the environment.  Warning: do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. Do not dispose of batteries in fire. Batteries may explode or leak. If the remote control is not be used for a certain length of time, remove the batteries. SETTING THE TIME After having inserted the batteries, the clock on the display flashes until the time is set. Proceed as follows: • Press the or button until the correct time is reached. Hold the button down to run rapidly through first the minutes, then the tens of minutes and then the hours. • Once the correct time has been reached, release the button and press the OK button to confirm. • To cancel the settings programmed on the remote control and restore the original settings, press the reset button lightly with the point of a pencil or pen. USING THE REMOTE CONTROL The first set of buttons on the remote control are the same as those on the control panel of the appliance. You should therefore refer to the instructions in the chapter Operating from the control panel to turn the appliance on, select the operating mode (AIR CONDITIONING, DEHUMIDIFYING, FAN, HEATING or SMART) and the fan speed. The following section describes the ADDITIONAL FUNCTIONS corresponding to the controls on the bottom part of the remote control. BOOST FUNCTION Ideal for the summer to cool rooms rapidly. To set this mode: • Press the button. The appliance operates in air conditioning mode at maximum fan speed. While this function is selected, it is not possible to set the temperature or change fan speed. Note:- BOOST function cannot be set during HEATING mode 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
I
NSERTING OR REPLACING THE BATTERIES
•
Remove the cover on the rear of the remote control.
•
Insert two “AAA” 1.5V batteries, making sure they are in the cor-
rect position (see the instructions inside the battery compart-
ment).
•
Replace the cover.
If the remote control unit is replaced or discarded, the batteries
must be removed and disposed of in accordance with current
legislation as they are harmful to the environment.
Warning:
do not mix old and new batteries. Do not mix alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium) bat-
teries. Do not dispose of batteries in fire. Batteries may explode
or leak.
If the remote control is not be used for a certain length of time,
remove the batteries.
S
ETTING THE TIME
After having inserted the batteries, the clock on the display flashes
until the time is set.
Proceed as follows:
•
Press the
or
button until the correct time is reached. Hold
the button down to run rapidly through first the minutes, then the
tens of minutes and then the hours.
•
Once the correct time has been reached, release the button and
press the
OK
button to confirm.
•
To cancel the settings programmed on the remote control and
restore the original settings, press the
reset
button lightly with the
point of a pencil or pen.
USING THE REMOTE CONTROL
The first set of buttons on the
remote control are the same
as those on the control panel
of the appliance. You should
therefore refer to the instruc-
tions in the chapter
Operating
from the control panel
to turn
the appliance on, select the
operating mode (
AIR CONDITIONING, DEHUMIDIFYING, FAN, HEA-
TING or SMART
) and the fan speed.
The following section describes the
ADDITIONAL FUNCTIONS
corre-
sponding to the controls on the bottom part of the remote control.
B
OOST FUNCTION
Ideal for the summer to cool rooms rapidly.
To set this mode:
•
Press the
button.
The appliance operates in air conditioning mode at maximum fan
speed.
While this function is selected, it is not possible to set the tem-
perature or change fan speed.
Note:
-
BOOST
function cannot be set during HEATING mode
11
Using the remote control
✔
✔