Definitive Technology C/L/R 2500 CLR2500 Manual - Page 13

Service, Installing the Logo, Installing the Feet/Angling Device, Technical Assistance, Visit us

Page 13 highlights

Installing the Logo Because the C/L/R 2500 can be used either vertically or horizontally, the logo is supplied separately. Holes are provided for installation when the speaker is used horizontally. These are located under the grill cloth at the center of the lower edge at the front of the speaker approximately 11/16'' up from the edge and 1 1/2'' apart. Locate the logo over these two holes and gently tap it in through the grill cloth. Installing the Feet/Angling Device The C/L/R 2500 is supplied with brass inserts designed to go into the bottom of the speaker to hold adjustable feet which hold the speaker above the surface it is placed on as well as give you the option of angling the speaker up or down to point directly at the listeners. Install three of these inserts in the bottom of the speakers. There are predrilled holes on the bottom of the speaker under the grill cloth (when the speaker is positioned horizontally). Simply locate the holes. Two holes are 2'' back from the front and 15 1/16'' apart. You also have a choice for the rear hole depending on the depth of the surface you will place the speaker on. They are located along the center line going from the front and the back of the speaker on the bottom. Then feel for them and select one of these holes. Gently tap the inserts in through the grill cloth and screw the feet in. Technical Assistance It is our pleasure to offer assistance if you have any questions regarding your C/L/R 2500s or their set-up. Please contact your nearest Definitive Technology dealer or contact us directly at 410-363-7148 or www.definitivetech.com. Service Service and warranty work on your Definitive loudspeakers will normally be performed by your local Definitive Technology dealer. If, however, you wish to return the speaker to us, please contact us first, describing the problem and requesting authorization as well as the locations of the nearest factory service center. Please note that the address given in this booklet is the address of our offices only. Under no circumstances should loudspeakers be shipped to our offices or returned without contacting us first and obtaining return authorization. Definitive Technology Offices 11433 Cronridge Drive Owings Mills, Maryland 21117 Phone: 410-363-7148 Visit us at www.definitivetech.com 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

The C/L/R 2500 is supplied with brass inserts designed to go into the bottom
of the speaker to hold adjustable feet which hold the speaker above the surface
it is placed on as well as give you the option of angling the speaker up or down
to point directly at the listeners. Install three of these inserts in the bottom of the
speakers. There are predrilled holes on the bottom of the speaker under the grill
cloth (when the speaker is positioned horizontally). Simply locate the holes.
Two holes are 2'' back from the front and 15
1
/
16
'' apart. You also have a choice
for the rear hole depending on the depth of the surface you will place the speak-
er on. They are located along the center line going from the front and the back
of the speaker on the bottom. Then feel for them and select one of these holes.
Gently tap the inserts in through the grill cloth and screw the feet in.
Service and warranty work on your Definitive loudspeakers will normally be
performed by your local Definitive Technology dealer. If, however, you wish to
return the speaker to us, please contact us first, describing the problem and
requesting authorization as well as the locations of the nearest factory service
center.
Please note that the address given in this booklet is the address of
our offices only. Under no circumstances should loudspeakers be shipped
to our offices or returned without contacting us first and obtaining return
authorization.
Definitive Technology Offices
11433 Cronridge Drive
Owings Mills, Maryland 21117
Phone: 410-363-7148
Service
Because the C/L/R 2500 can be used either vertically or horizontally, the
logo is supplied separately. Holes are provided for installation when the speak-
er is used horizontally. These are located under the grill cloth at the center of
the lower edge at the front of the speaker approximately
11
/
16
'' up from the edge
and 1
1
/
2
'' apart. Locate the logo over these two holes and gently tap it in
through the grill cloth.
Installing the Logo
Installing the Feet/Angling Device
Technical Assistance
It is our pleasure to offer assistance if you have any questions regarding
your C/L/R 2500s or their set-up. Please contact your nearest Definitive
Technology dealer or contact us directly at
410-363-7148 or www.defini-
tivetech.com.
Visit us at www.definitivetech.com
13