Definitive Technology C/L/R 2500 CLR2500 Manual - Page 6

Bi- or Tri-Wiring The concept of bi- or tri-wiring is that higher sonic performance (greater inner detail, higher definition, increased transparency and improved depth) is achieved by utilizing two or three sets of wires to connect each loudspeaker to its respective channel of your amplifier or receiver. If you choose this method of hook-up, follow these instructions: For bi-wiring: (See diagram # 2) Remove both the jumpers between the mid and high terminals on the speaker. Then take care to ensure that both the red (+) high and red (+) mid terminals of the speaker are connected to the red (+) terminal of the center channel of your amplifier (each using one conductor of each of the two sets of wires for the center channel) and that both the black (-) high and black (-) mid terminals of the your speaker are connected to the black (-) terminal of the center channel of your amplifier using the other conductor of each of the two sets of wires for the center channel. Utilize the same hook-up procedure for the left and right channels if you are using C/L/R 2500s on these channels. HIGH LEVEL IN High High Mid Mid LEVEL FULL RANGE LOW LEVEL IN Power Automatic On/Off Low 6 Low + - Center Power Amplifier or Receiver Diagram # 2: Bi-Wiring