Dell 1350 Color User's Guide - Page 300
Apply New Settings, Ghost Configuration Chart
View all Dell 1350 Color manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
Action Yes 1 Adjust the transfer bias. The task is 1 Launch the Tool Box, click Chart Print on the complete. Diagnosis tab. 2 Click the Ghost Configuration Chart button. The Ghost Configuration Chart is printed. 3 Launch the Tool Box, click BTR Refresh Mode on the Printer Maintenance tab. 4 Check the check box next to On, and then click Apply New Settings. 5 Click Chart Print on the Diagnosis tab. 6 Click the Ghost Configuration Chart button. The Ghost Configuration Chart is printed. Is the problem recovered? 2 The print media surface may be uneven. Try The task is changing the Paper Type setting in the printer complete. driver. For example, change the plain paper to thick. 1 On the Paper/Output tab in Printing Preferences of the printer driver, change the Paper Type setting. Is the problem recovered? 3 Adjust the fuser temperature. The task is 1 Launch the Tool Box, and click Adjust Fuser complete. on the Printer Maintenance tab. 2 Adjust the fixing temperature by turning up the value for your printing media. 3 Click Apply New Settings. 4 Click close box to exit Tool Box. Is the problem recovered? 4 If you use non-recommended print media, use The task is the print media recommended for the printer. complete. Is the problem recovered? No Go to action 2. Go to action 3. Go to action 4. Contact Dell. 296 Troubleshooting