Dell 1350cnw Color Laser Printer User's Guide - Page 58
Disabling the firewall before installing your printer, Inserting the Drivers and Utility CD
View all Dell 1350cnw Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
2 Select TCP/IP Settings from the list on the left side of the page. The TCP/IP Settings page appears. If the IP address shows 0.0.0.0 (the factory default) or 169.254.xx.xx, an IP address has not been assigned. To assign one for your printer, see "Assigning an IP Address (for IPv4 mode)" on page 39. Disabling the firewall before installing your printer NOTE: For Windows XP, Service Pack 2 or 3 must be installed. If you are running one of the following operating systems, you must disable the firewall before installing the Dell printer software: • Windows 7 • Windows Vista • Windows Server 2008 R2 • Windows Server 2008 • Windows XP 1 Click Start Help and Support. NOTE: For Windows Server 2008 R2 and Windows 7 operating systems, if you use Online Help, switch to Offline Help on Windows Help and Support window. 2 In the Search box, type firewall and then press Enter. In the list, click Turn Windows Firewall on or off and then follow the instructions on the screen. Enable the firewall after the installation of the Dell printer software is complete. Inserting the Drivers and Utility CD 1 Insert the Drivers and Utilities CD into your computer to start Easy Setup Navigator. NOTE: If the CD does not automatically launch, click Start All Programs (for Windows Vista and Windows 7) Accessories (for Windows Vista and Windows 7) Run, and then type D:\setup_assist.exe (where D is the drive letter of your CD), and then click OK. 54 Installing Printer Drivers on Computers Running Windows