Dell 27 Gaming G2722HS G2722HS Monitor Users Guide - Page 55
Common problems, Common, Symptoms, What You, Experience, Possible Solutions
View all Dell 27 Gaming G2722HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Common problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Common Symptoms No Video/ Power LED off No Video/ Power LED on Missing Pixels Stuck-on Pixels Brightness Problems Safety Related Issues Intermittent Problems What You Experience Possible Solutions No picture • Ensure that the video cable connecting the monitor and the computer is properly connected and secure. • Verify that the power outlet is functioning properly using any other electrical equipment. • Ensure that the power button is depressed fully. • Ensure that the correct input source is selected in the Input Source menu. No picture or no • Increase brightness and contrast controls via brightness OSD. • Perform monitor self-test feature check. • Check for bent or broken pins in the video cable connector. • Run the built-in diagnostics. • Ensure that the correct input source is selected in the Input Source menu. LCD screen has • Turn off the monitor and turn it on again. spots • Pixel that is permanently off is a natural defect that can occur in LCD technology. • For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: https://www.dell.com/pixelguidelines. LCD screen has • Turn off the monitor and turn it on again. bright spots • Pixel that is permanently off is a natural defect that can occur in LCD technology. • For more information on Dell Monitor Quality and PixelPolicy, see Dell Support site at: https://www.dell.com/pixelguidelines. Picture too dim • Reset the monitor to factory settings. or too bright • Adjust brightness and contrast controls via OSD. Visible signs of • Do not perform any troubleshooting steps. smoke or sparks • Contact Dell immediately. Monitor • Ensure that the video cable connecting the malfunctions on monitor to the computer is connected properly & off and is secure. • Reset the monitor to factory settings. • Invoke the self-test feature (see Self-test) to determine if the intermittent problem is flagged in the self-test mode. Troubleshooting | 55