Dell 3115cn Dell 3115cn User's Guide - Page 358
Dynamic Addressing BOOTP/DHCP, Restoring the Network Configuration, IP Address
UPC - 884116005483
View all Dell 3115cn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 358 highlights
IP Address * 0. 0. 0. 0. Enter a number between 0 and 255 for each octet. 6. Enter the numbers from the keypad, and then press to move between octets and press . 7. Repeat 5 to complete the address from the 1st byte to the 4th byte. 8. Repeat 5 through step 8 to configure the other TCP/IP parameters. Dynamic Addressing (BOOTP/DHCP) To assign the TCP/IP address automatically using a DHCP or BOOTP server on your network, take the following steps: 1. Press until >SETUP appears, and then press . 2. Press until >Admin Menu appears, and then press . 3. Press until >Wired Net or >Wireless Net appears, and then press . 4. Press until >TCP/IP appears, and then press . 5. Press until >DHCP or >BOOTP appears, and then press . Restoring the Network Configuration You can return the network configuration to its default settings. 1. Press until >SETUP appears, and then press . 2. Press until >Admin Menu appears, and then press . 3. Press until >Wired Net or >Wireless Net appears, and then press . 4. Press until >Initialize NVM appears, and then press . 5. Press to select Yes, and then press . The network configuration is restored. 6.