Dell 3333 User's Guide - Page 236
Recycling Dell products, Moving the printer to another location
UPC - 884116037514
View all Dell 3333 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
7 After you replace the photoconductor kit, reset the photoconductor counter. To reset the counter, see the instruction sheet that came with the new photoconductor kit. Warning-Potential Damage: Resetting the photoconductor counter without replacing the photoconductor may damage your printer and void your warranty. 8 Close the front door. Recycling Dell products To return Dell products for recycling: 1 Visit our Web site at www.dell.com/recycling. 2 Select your country from the list. 3 Follow the instructions on the computer screen. Moving the printer to another location Warning-Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty. CAUTION-POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to move it safely. CAUTION-POTENTIAL INJURY: Follow these guidelines to avoid personal injury or printer damage: • Turn the printer off using the power switch, and then unplug the power cord from the wall outlet. • Disconnect all cords and cables from the printer before moving it. • Remove all printer options before moving the printer. • Use the handholds located on both sides of the printer to lift it. • Make sure your fingers are not under the printer when you set it down. • Before setting up the printer, make sure there is adequate clearance around it. For more information, see "Selecting a location for the printer" on page 20. Maintaining the printer 236