Dell 3333DN User Manual - Page 172
Parallel menu, USB Buffer, Mac Binary PS, USB With ENA, PCL SmartSwitch
View all Dell 3333DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Menu item Description USB Buffer Sets the size of the USB input buffer Disabled Notes: Auto 3K to • Auto is the factory default setting. • The Disabled setting turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed. • The USB buffer size value can be changed in 1-K increments. • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether the Resource Save setting is On or Off. • To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel, serial, and network buffers. • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated. Mac Binary PS On Off Auto Sets the printer to process Macintosh binary PostScript print jobs Notes: • Auto is the factory default setting. • The Off setting filters print jobs using the standard protocol. • The On setting processes raw binary PostScript print jobs. USB With ENA ENA Address ENA Netmask ENA Gateway Sets the network address, netmask, or gateway information for an external print server that is attached to the printer using a USB cable. Note: This menu item is available only if the printer is attached to an external print server through the USB port. Parallel menu This menu appears only if an optional parallel card is installed. Menu item PCL SmartSwitch On Off Description Sets the printer to automatically switch to PCL emulation when a print job received through a parallel port requires it, regardless of the default printer language Notes: • On is the factory default setting. • When the Off setting is used, the printer does not examine incoming data. • When the Off setting is used, the printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off. Understanding printer menus 172