Dell 341-7212 User Guide - Page 39
Adding a Disk Drive to a Configuration on a PERC 5/i Controller or on a PERC 6/i Controller
View all Dell 341-7212 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
To start the Reconstruction Wizard, select a virtual disk icon in the left panel of the Dell SAS RAID Storage Manager window and then select Operations-> Advanced Operations-> Reconstruction Wizard from the menu. This section has the following subsections explaining the Reconstruction Wizard options: • Adding a Disk Drive to a Configuration on a PERC 5/i Controller or on a PERC 6/i Controller • Changing the RAID Level of a Configuration on a PERC 5/i Controller or on a PERC 6/i Controller Adding a Disk Drive to a Configuration on a PERC 5/i Controller or on a PERC 6/i Controller NOTICE: Be sure to back up the data on the virtual disk before you add a drive to it. Follow these steps to add a disk drive to a configuration with the Configuration Wizard: 1 Select a virtual disk icon in the left panel of the Dell SAS RAID Storage Manager window and then select Operations-> Advanced Operations-> Reconstruction Wizard from the menu to start the Reconstruction Wizard. 2 Click Add Drive on the Reconstruction Wizard menu screen, and then click Next. 3 When the next screen appears, select an available disk drive in the top panel and click the down-arrow Add button to move it to the Selected Drives list. 4 Click Next to continue. The next screen appears. 5 (Optional) Select a different RAID level for the configuration from the drop-down menu in the lower right of the window. 6 Review the information in the window. If everything is acceptable, click Finish. A Reconstruct operation begins on the virtual disk. You can monitor the progress of the reconstruction in the Group Show Progress window. To do this, select Group Operations-> Show Progress. Configuration 39