Dell 39320A User Guide - Page 2
Introduction - scsi
![]() |
View all Dell 39320A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Back to Contents Page Introduction Adaptec™ U320 SCSI RAID 0 or 1 User's Guide Overview RAID Storage Management Utilities System Requirements Adaptec U320 SCSI RAID 0 or 1 Features Configuration Features RAID Performance Features RAID Management Features Fault Tolerance Features Software Utilities Operating System Drivers and Utility Adaptec U320 SCSI RAID 0 or 1 Firmware Overview The Adaptec U320 SCSI RAID 0 or 1 is a high-performance 64-bit/133-MHz PCI-X, dual-channel SCSI card with integrated RAID 0 and 1. It provides data protection at the fastest SCSI speeds available up to 640 MB/sec total throughput using Ultra320 SCSI Low Voltage Differential (LVD) devices. The Adaptec U320 SCSI RAID 0 or 1 controller has the following features: Two independent bootable SCSI channels 15 multifunction devices per channel Mixing of LVD and SE devices, with associated performance degradation. (HVD devices are not supported.) Wide or Narrow SCSI data path CRC-32 error detection for Ultra320/Ultra160 modes during data I/O phases in LVD mode only Automatic termination control Manual termination override for multi-initiator environments Fuse-protected (up to 1.25 A) termination power circuit SCSI card and devices are configurable using SCSISelect®, the BIOS Configuration utility
![](/manual_guide/products/dell-39320a-user-guide-16e7c4e/2.png)