Dell 4210X Protocol Document - Page 5

V. Sync Polarity 0xefbe 0x10 0x0005 0x3e3f 0x1111 0x0001 0x5c 0x01: Negative 0x02: Postivite Key Pad Lock State 0xefbe 0x10 0x0005 0xffff 0x1111 0x0001 0x5d 0x01: Key Pad Lock On 0x02: Key Pad Lock Off Mute Off 0xefbe 0x10 0x0005 0x983c 0x1111 0x0001 0x5f Get Mute State 0xefbe 0x10 0x0005 0xffee 0x1111 0x0001 0x61 0x00 : Mute Off 0x01 : Mute On Unhide 0xefbe 0x10 0x0005 0x3fed 0x1111 0x0001 0x64 Get Hide State 0xefbe 0x10 0x0005 0xfe2d 0x1111 0x0001 0x65 0x00: Unhide 0x01: Hide OSD Transparancy Write 0xefbe 0x10 0x0006 0x5adc 0x1111 0x0002 0x66 0x00~0x64 Range (0x00~0x0f) OSD Transparancy Read 0xefbe 0x10 0x0005 0x7fec 0x1111 0x0001 0x67 Range (0x00~0x0f) Volume Write 0xefbe 0x10 0x0006 0xdb18 0x1111 0x0002 0x68 0x00~0x14 Range (0x00~0x14) Source-VGA Analog-B 0xefbe 0x10 0x0005 0xfe28 0x1111 0x0001 0x69 Temp Alert 0xefbe 0x10 0x0005 0xbe29 0x1111 0x0001 0x6a 0x00: Normal 0x01: Abnormal Exit Lockup 0xefbe 0x10 0x0005 0xffeb 0x1111 0x0001 0x6d 0x00: Off Alert Volume 0xefbe 0x10 0x0006 0xbfea 0x1111 0x0002 0x6e 0x00~0x03 0x01: Low 0x02: Mid 0x03: High 0x00: Off 0x01: CC1 Closed Captions 0xefbe 0x10 0x0006 0x7e2a 0x1111 0x0002 0x6f 0x00~0x04 0x02: CC2 0x03: CC3 0x04: CC4 0x00 : Off 0x1e : 30 min Power Saving 0xefbe 0x10 0x0006 0xfe66 0x1111 0x0002 0x81 0x3c : 60 min 0x5a : 90 min 0x78 : 120min Quick Shutdown 0xefbe 0x10 0x0006 0xbe67 0x1111 0x0002 0x82 0x00~0x01 0x00: No 0x01: Yes Lamp-Mode 0xefbe 0x10 0x0005 0x7fa7 0x1111 0x0001 0x83 0x00. Eco 0x01. Normal Operating Hours 0xefbe 0x10 0x0005 0x3e65 0x1111 0x0001 0x84 Hours (2 byte) Password Off 0xefbe 0x10 0x0005 0xffa5 0x1111 0x0002 0x85 Password Delete 0xefbe 0x10 0x0005 0xbfa4 0x1111 0x0002 0x86 Speaker 0xefbe 0x10 0x0005 0x7e64 0x1111 0x0002 0x87 0x00~0x01 0x00: Off 0x01: On Speaker Status 0xefbe 0x10 0x0005 0x3e60 0x1111 0x0001 0x88 0x00: Off 0x01: On Zoom Status 0xefbe 0x10 0x0005 0xffa0 0x1111 0x0001 0x89 0x00~0x0a Range 0x00~0x0a 0x00 : Off Get Power Saving Status 0xefbe 0x10 0x0006 0xbfa1 0x1111 0x0002 0x8a 0x1e : 30 min 0x3c : 60 min 0x5a : 90 min 0x78 : 120min 0x01: Standby 0x02: Warm Up System Status 0xefbe 0x10 0x0005 0x7e46 0x1111 0x0001 0xff 0x03: Power On 0x04: Cooling 0x05: Power Saving Note 2: After power on the projector, wait for 5 seconds before sending next command. Note 3: The range will depend on VGA input resolution. Note 4: If sending multiple commands, check that a response has been received from the projector before sending next command. Information in this document is subject to change without notice. © 2008 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. December 2008 Rev. A00