Dell 5110cn Color Laser Printer User Guide - Page 113
Selecting Preprinted Forms and Letterhead, Printing on Letterhead, orientation - best laser printer
View all Dell 5110cn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Selecting Preprinted Forms and Letterhead When selecting preprinted forms and letterhead paper for the printer: Use grain long papers for best results. Use only forms and letterhead printed using an offset lithographic or engraved printing process. Select papers that absorb ink, but do not bleed. Avoid papers with rough or heavily textured surfaces. Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand temperatures of 225°C (437°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner or the silicone in the fuser. Inks that are oxidationset or oil-based should meet these requirements; latex inks might not. If you are in doubt, contact your paper supplier. Printing on Letterhead Check with the manufacturer or vendor to determine whether the preprinted letterhead you have selected is acceptable for laser printers. Page orientation is important when printing on letterhead. Use the following table for help when loading letterhead in the print media sources. Print media source Standard 500-sheet tray Optional 500-sheet tray module or 1000sheet module Face up Print side Page orientation Letterhead at the back of the tray Multipurpose feeder Face down Letterhead enters the