Dell 5110cn Color Laser Printer User Guide - Page 160
Reset Wireless, TCP/IP, Purpose, Values
View all Dell 5110cn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Good Indicates good signal strength. Indicates marginal signal strength. Acceptable Low Indicates insufficient signal strength. Indicates that no signal is received. No Reception Reset Wireless Purpose To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network settings are reset to their default values. TCP/IP Purpose: To specify the TCP/IP settings. The change becomes effective after the printer is turned off and then on again. Values: IP Mode*1 Dual Stack Uses both IPv4 and IPv6 to set the IP address. IPv4 Mode Uses IPv4 to set the IP address. IPv6 Mode*3 Uses IPv6 to set the IP address. IPv4 Get IP Address Automatically sets the IP address. AutoIP* Uses BOOTP to set the IP address. BOOTP Uses RARP to set the IP address. RARP Uses DHCP to set the IP address. DHCP Enables the IP address entered on the operator panel. Panel