Dell 5230 User's Guide - Page 101
TCP/IP menu, Network/Ports, Standard Network, Network <x>, Std Network Setup, Net <x> Setup
UPC - 884116026815
View all Dell 5230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Menu item Job Timeout 0-225 seconds Banner Page Off On Description Sets the amount of time in seconds that a network print job can take before it is canceled Notes: • 90 seconds is the factory default setting. • A setting value of 0 disables the timeout. • If a value of 1-9 is selected, then the setting is saved as 10. Allows the printer to print a banner page Note: Off is the factory default setting. TCP/IP menu Use the following menu items to view or set the TCP/IP information. Note: This menu is available only for network models or printers attached to print servers. This menu is available from the Network/Ports menu: Network/Ports Standard Network or Network Std Network Setup or Net Setup TCP/IP Menu item Activate On Off View Hostname IP Address Netmask Gateway Enable DHCP On Off Enable RARP On Off Enable BOOTP On Off Description Activates TCP/IP Note: On is the factory default setting. Lets you view the current TCP/IP hostname Note: This can be changed only from the Embedded Web Server. Lets you view or change the current TCP/IP Address Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that support BOOTP and RARP. Lets you view or change the current TCP/IP Netmask Lets you view or change the current TCP/IP Gateway Specifies the DHCP address and parameter assignment setting Note: On is the factory default setting. Specifies the RARP address assignment setting Note: On is the factory default setting. Specifies the BOOTP address assignment setting Note: On is the factory default setting. Understanding printer menus 101