Dell 5230 User's Guide - Page 96
Bin Setup menu, Portrait Width, Portrait Height, Feed Direction, Output Bin, Con Bins
UPC - 884116026815
View all Dell 5230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Menu item Portrait Width 3-14 inches 76-360 mm Portrait Height 3-14 inches 76-360 mm Feed Direction Short Edge Long Edge Bin Setup menu Menu Item Output Bin Standard Bin Bin Configure Bins Mailbox Link Mail Overflow Link Optional Type Assignment Description Sets the portrait width Notes: • If the width exceeds the maximum, the printer uses the maximum width allowed. • 8.5 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. • 216 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Sets the portrait height Notes: • If the height exceeds the maximum, the printer uses the maximum height allowed. • 14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. • 356 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Specifies the feed direction if the paper can be loaded in either direction Notes: • Short Edge is the factory default setting. • Long Edge appears only if the longest edge is shorter than the maximum width supported in the tray. Description Specifies the default output bin Note: Standard Bin is the factory default setting. Specifies configuration options for output bins Notes: • Mailbox is the factory default setting. • Bins assigned the same name are automatically linked unless Link Optional is selected. • The Mailbox setting treats each bin as a separate mailbox. • The Link setting links together all available output bins. • The Link Optional setting links together all available output bins except the standard bin and only appears when at least two optional bins are installed. • The Type Assignment setting assigns each paper type to an output bin or linked bin set. Understanding printer menus 96