Dell 5535dn Mono Laser MFP User's Guide - Page 161
Universal Setup menu, Bin Setup menu, Units of Measure, Portrait Width, Portrait Height
View all Dell 5535dn Mono Laser MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Universal Setup menu These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal Paper Size is a user-defined paper size setting. It is listed with the other paper size settings and includes similar options, such as support for duplex printing and printing multiple pages on one sheet. Menu item Units of Measure Inches Millimeters Portrait Width 3-14 inches 76-360 mm Portrait Height 3-14 inches 76-360 mm Feed Direction Short Edge Long Edge Description Identifies the units of measure Notes: • Inches is the US factory default setting. • Millimeters is the international factory default setting. Sets the portrait width Notes: • If the width exceeds the maximum, the printer uses the maximum width allowed. • 8.5 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. • 216 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Sets the portrait height Notes: • If the height exceeds the maximum, the printer uses the maximum height allowed. • 14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. • 356 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Specifies the feed direction if the paper can be loaded in either direction Notes: • Short Edge is the factory default setting. • Long Edge appears only if the longest edge is shorter than the maximum width supported in the tray. Bin Setup menu Menu Item Output Bin Standard Bin Bin Description Identifies installed output bins Note: Standard Bin is the factory default setting. Understanding printer menus 161