Dell ALIENWARE AURORA Service Manual - Page 19
Removing the Drive-Bay Shroud, Replacing the Drive-Bay Shroud
UPC - 067540555575
View all Dell ALIENWARE AURORA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Removing the Drive-Bay Shroud 1. Follow the instructions in "Before You Begin" on page 6. 2. Remove the left side-panel (see "Removing the Left Side-Panel" on page 11). 3. Open the PCI shroud (see "Opening the PCI Shroud" on page 18). 4. Press the tabs and slide the drive-bay shroud towards the back of the chassis. 5. Disconnect the drive-bay shroud battery cable from the connector on the master I/O board. Replacing the Drive-Bay Shroud 1. Follow the instructions in "Before You Begin" on page 6. 2. Connect the drive-bay shroud battery cable to the connector on the master I/O board. 3. Align the drive-bay shroud with the slots on the chassis. 4. Slide the drive-bay shroud toward the front of the chassis until it clicks into place. 5. Close the PCI shroud (see "Closing the PCI Shroud" on page 18). 6. Replace the left side-panel (see "Replacing the Left Side-Panel" on page 11). 7. Connect your computer and devices to electrical outlets and then turn them on. 1 1 tabs (2) CHAPTER 4: SHROUDS 2 2 drive-bay shroud 019 /019