Dell AUA-4000/Dell User Guide - Page 10
Enabled, Disabled, Replace the slot cover screw. When installed properly, the card - aua computers
 |
UPC - 000000127066
View all Dell AUA-4000/Dell manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installing USB2connect 4 Replace the slot cover screw. When installed properly, the card should be level with the expansion slot. 5 Close the computer cabinet and reattach the power cord. The USB2connect AUA-5100 adapter shares one internal and external connector so that only five can be used at one time. The default setting is that all external connectors are Enabled, and the internal connector is Disabled. To switch these settings so that the internal port is enabled, set the jumpers according to the figure below. Changing jumpers on the AUA-5100: External Port Enabled (default) All 5 external ports enabled jumpers disabled Internal Port Enabled disabled These 4 ports enabled jumpers enabelendabled 5
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
 |
 |
5
Installing USB2connect
4
Replace the slot cover screw. When installed properly, the card
should be level with the expansion slot.
5
Close the computer cabinet and reattach the power cord.
The USB2connect AUA-5100 adapter shares one internal and external
connector so that only five can be used at one time. The default setting is
that all external connectors are
Enabled
, and the internal connector is
Disabled
. To switch these settings so that the internal port is enabled, set the
jumpers according to the figure below
.
Changing jumpers on the AUA-5100:
All 5
external
ports
enabled
External Port Enabled (default)
jumpers
disabled
These 4
ports
enabled
jumpers
Internal Port Enabled
disabled
enabled