Dell Alienware 13 R2 Service Manual - Page 26
Replacing the solid-state drive, Procedure, Post-requisites
View all Dell Alienware 13 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Replacing the solid-state drive WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Solid-state drives are fragile. Exercise care when handling the hard drive. Procedure 1 Slide the solid-state drive into the slot on the solid-state drive assembly. 2 Replace the screw that secures the solid-state drive to the solid-state drive assembly. 3 Align the screw holes on the solid-state drive assembly with the screw holes on the computer base. 4 Replace the screws that secure the solid-state drive assembly to the computer base. 5 Connect the solid-state drive cable to the system board. 6 Align the screw holes on the solid-state drive bracket with the screw holes on the solid-state drive assembly. 7 Replace the screws that secure the solid-state drive bracket to the solid- state drive assembly. Post-requisites Replace the base panel. 26