Dell Alienware Area 51 R2 Service Manual - Page 112
Replacing the Wireless Card, Procedure, Post-requisites - support
View all Dell Alienware Area 51 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Replacing the Wireless Card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Align the notch on the wireless card with the tab on the wireless-card slot. 2 Insert the wireless card at an angle into the connector. 3 Push the securing tab out and secure the wireless card into position. 4 Connect the antenna cables to the wireless card. A label at the tip of the antenna cables indicates color scheme for the wireless card supported by your computer. Connectors on the wireless card Antenna-cable sticker color Auxiliary (1) Black Main (2) White Post-requisites 1 If you have multiple graphics cards, replace the graphics card. See "Replacing the Graphics Card". 2 Replace both the left and right side-panels. See "Replacing the Side Panels". 3 Replace the stability foot. 112