Dell Alienware Area 51 R2 Service Manual - Page 86
Removing the Front-bezel Heat-sensor, Prerequisites, Procedure
View all Dell Alienware Area 51 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Removing the Front-bezel Heat-sensor WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites 1 Remove the stability foot. 2 Remove both the left and right side-panels. See "Removing the Side Panels". 3 Remove the PCI fan. See "Removing the PCI fan". Procedure NOTE: After removing the PCI fan, locate the sensor on the fan shroud. 1 Lay the computer on the left side. 2 Press the release tab on the securing clip. 3 Pry out the chassis heat-sensor cable from the securing clip. 86