Dell Alienware Aurora Ryzen Edition R10 Alienware Aurora Ryzen Edition Service - Page 68
Installing the bottom cover
View all Dell Alienware Aurora Ryzen Edition R10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Installing the bottom cover Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the bottom cover and provides a visual representation of the installation procedure. Steps 1. Align the tabs on the bottom cover with the slots on the chassis. 2. Rotate the bottom cover towards the chassis until it snaps into place. Next steps 1. Install the front bezel. 2. Install the 2.5-inch hard-drive cages. 3. Install the right-side cover. 4. Install the top cover. 5. Install the left-side cover. 6. Follow the procedure in After working inside your computer. 68
Installing the bottom cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the bottom cover and provides a visual representation of the installation procedure.
Steps
1.
Align the tabs on the bottom cover with the slots on the chassis.
2.
Rotate the bottom cover towards the chassis until it snaps into place.
Next steps
1.
Install the
front bezel
.
2.
Install the
2.5-inch hard-drive cages
.
3.
Install the
right-side cover
.
4.
Install the
top cover
.
5.
Install the
left-side cover
.
6.
Follow the procedure in
After working inside your computer
.
68