Dell Alienware Steam Machine R2 Alienware Steam Machine R2 Service Manual - Page 29

Replacing the bottom USB-port, Procedure, Post-requisites

Get Dell Alienware Steam Machine R2 PDF manuals and user guides View all Dell Alienware Steam Machine R2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Replacing the bottom USBport WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Slide the USB port under the tab on the chassis. 2 Replace the screw that secures the USB port to the chassis. 3 Align and slide the tabs on USB-port bracket in the slots on the chassis. 4 Replace the screw that secures the USB-port bracket to the chassis 5 Route the USB-port cable through the routing guides on the chassis and slide the cable through the cable-routing hole on the chassis. 6 Turn the computer over. 7 Connect the USB-port cable to the system board. Post-requisites 1 Replace the top cover. 2 Replace the base cover. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Replacing the bottom USB-
port
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before working inside your computer
.
After working inside your computer, follow the instructions
in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
1
Slide the USB port under the tab on the chassis.
2
Replace the screw that secures the USB port to the chassis.
3
Align and slide the tabs on USB-port bracket in the slots on the chassis.
4
Replace the screw that secures the USB-port bracket to the chassis
5
Route the USB-port cable through the routing guides on the chassis and
slide the cable through the cable-routing hole on the chassis.
6
Turn the computer over.
7
Connect the USB-port cable to the system board.
Post-requisites
1
Replace the
top cover
.
2
Replace the
base cover
.
29