Dell Alienware m15 R7 AMD Service Manual - Page 60
Installing the fan and heat-sink assembly
View all Dell Alienware m15 R7 AMD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Steps 1. Turn over the system-board assembly. 2. In reverse sequential order (6>5>4>3>2>1), loosen the six captive screws (M2x4) that secure the fan and heat-sink assembly to the system board. 3. Lift the fan and heat-sink assembly off the system board. Installing the fan and heat-sink assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task NOTE: If either the system board or the fan and heat-sink assembly is replaced, use the thermal grease provided in the kit to ensure that thermal conductivity is achieved. The following image(s) indicate the location of the fan and heat-sink assembly and provides a visual representation of the installation procedure. 60