Dell Alienware m15 R7 AMD Service Manual - Page 63
USB board, Removing the USB board
View all Dell Alienware m15 R7 AMD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Steps 1. Connect the ethernet and audio board to the system board. 2. Align the screw holes on the ethernet and audio board to the screw holes on the system-board assembly. 3. Replace the two screws (M2x4) that secure the ethernet and audio board to the system-board assembly. 4. Turn the system-board assembly over. Next steps 1. Follow the procedure from step 6 to step 25 in installing the system board (NVIDIA GeForce 3060/3070 Ti/3080 Ti) or system board (NVIDIA GeForce 3050 Ti), whichever applicable. 2. Install the battery. 3. Install the rear-I/O cover. 4. Install the wireless card. 5. Install the 2230 solid-state drive or 2280 solid-state drive in slot one, whichever applicable. 6. Install the 2230 solid-state drive or 2280 solid-state drive in slot two, whichever applicable. 7. Install the base cover. 8. Follow the procedure in After working inside your computer. USB board Removing the USB board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive or 2280 solid-state drive in slot one, whichever applicable. 4. Remove the 2230 solid state drive or 2280 solid-state drive in slot two, whichever applicable. 5. Remove the wireless card. 6. Remove the rear-I/O cover. 7. Remove the battery. 8. Follow the procedure from step 1 to step 21 in removing the system board (NVIDIA GeForce 3060/3070 Ti/3080 Ti) or system board (NVIDIA GeForce 3050 Ti), whichever applicable. 63