Dell Alienware m15 Ryzen Edition R5 Service Manual - Page 57
Steps
![]() |
View all Dell Alienware m15 Ryzen Edition R5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Steps 1. NOTE: Place the system board on a clean and flat surface. Replace the USB board. 2. Replace the heat-sink assembly. 3. Turn the system-board assembly over. 4. Align the screw holes on the system-board assembly with the screw holes on the palm-rest and keyboard assembly. 5. Route the power-button board cable under the USB board. 6. Replace the seven screws (M2x4) that secure the system-board assembly to the palm-rest and keyboard assembly. 7. Align the screw holes on the USB Type-C port bracket with the screw holes on the system board. NOTE: The USB Type-C port bracket must be removed from the previous system board and placed at the new system board. This step is applicable if a new system board is replacing the previous system board. 8. Replace the two screws (M2x4) that secure the USB Type-C bracket to the system board. 9. Connect the display cable to the system board and close the latch to secure the cable. NOTE: Move in clock-wise direction to connect the cables to the system board. 10. Connect the Alienhead LED cable to the system board. 57
![](/manual_guide/products/dell-alienware-m15-ryzen-edition-r5-service-manual-67faf79/57.png)